How To Clean Lifeproof Case Camera Lens

Download Article

Download Article

Lifeproof cases are accessories fabricated for outdoor use electronics, including phones and tablets. These products are made to resist h2o and falls in the roughest terrain. Still, your Lifeproof case does accrue grime and wear down over fourth dimension. It needs to be cleaned and tested to stay feasible. To make clean out your case and keep your device protected, test the seal in water, wash the case with lather and water, and wipe downwards the phone or tablet with a microfiber cloth.

1. ane

   Wipe small stains off with a fabric. During daily apply, you won't desire to do a deep cleaning every fourth dimension your case accumulates dirt or dust. In these cases, apply a soft cloth. Get the cloth clammy with warm water then employ it to wipe off the surface debris.^[1]

   • Don't make clean with rough pads or brushes. These scrape the cases.

2. 2

   Rinse off dirty h2o. Immediately afterward exposing the case to not-fresh water, including soap, chlorine-treated pool water, or seawater, return the example to a faucet. Employ cool or lukewarm h2o to rinse the entire case so the not-fresh water does not abrade it. Rinsing this way protects the case when you don't have time to clean with soap.

   • Unless yous plan on cleaning out the inside of the case and are sure the seal is secure, you do non need to remove your telephone.

   Advertizement

3. iii

   Wash with soap. First, ensure all the ports are closed. Apply a balmy dish soap and rinse it off under warm water in a sink. Perform this deeper cleaning whenever you see deeper stains that don't come off with rinsing or at least every three months when you are supposed to perform a water seal test.^[2]

   • Never clean with bleach or annoying cleaners or polishes.

4. iv

   Dry the case. Milkshake off excess moisture. For speedier drying, gently wipe the case with a soft cloth. Otherwise, leave the case out on a newspaper towel away from direct sunlight. Only use a microfiber cloth on the screen so the screen doesn't get scratched.

Advertisement

1. 1

   Remove your phone. Use the plastic pick that came with the Lifeproof case to wedge apart the halves from one of the corners. If you don't have the option on manus, apply a coin. Place your phone far away so information technology doesn't get wet.

2. 2

   Rinse with soap and water. Again, apply a balmy dish soap directly to the case. Spread it around with your finger or a fabric. With the empty case, place information technology in a lukewarm h2o bathroom or rinse it under the faucet. Brand sure to get loose any clay in the corners or in the ports.

3. iii

   Dry the example halves. Shake off every bit much moisture equally you can, then wipe it down with a soft fabric. For slower air drying, leave the halves out on newspaper towels away from directly sunlight. Avoid using fluffy towels, as these can introduce lint that affects the phone or the seal.^[three]

Advertisement

1. 1

   Remove your phone. The seal test should be done earlier water exposure, after a bad fall, or every three months otherwise. This tests the example'due south power to keep out water, so if you haven't removed your telephone already to clean the case, do it at present.^[4]

2. 2

   Submerge the case. Make certain the case is closed, including the charge port. Hold the instance underwater for up to 30 minutes. You can place something heavy on top of the case in order to keep it underwater.^[5]

3. three

   Wipe off the outside. One time the thirty minutes are up, make clean off the outside of the case only. Use a soft cloth. Make sure all the h2o is gone then none of it gets inside.

4. 4

   Open up the case. Utilise the plastic key or a coin to wedge open up the corner of the case. Separate the halves of the case. Bank check them thoroughly for whatever sign of leaks. If the instance is completely dry, you are gratuitous to put your telephone back inside.

Advertisement

1. 1

   Cheque the ports. The charge port, camera ring, and headphone jack on both the instance and telephone accrue clay. Whenever you open them or notice clay, information technology is a adept idea to use a soft cloth. Remove the dirt as soon as you notice information technology to prevent it from spreading inside the phone or instance.

2. two

   Wipe your phone's surfaces. Lifeproof cases come up with a microfiber cloth, but these can as well exist found at a general retailer. Only employ cloth that is practiced for eyeglasses, jewelry, and electronics, as these won't scratch the screen. Make sure the textile removes all dirt and dust before you put your phone or tablet in the example.

3. three

   Shut the case. Lay your device in the bottom of the case. Place the elevation role of the case over information technology, then run your finger around the edges to snap information technology in identify. Earlier you finish, bank check to meet if y'all got all the dirt, dust, and lint. Any spots you miss will exist amplified on the screen or stick in the charge and camera ports. Undo the case and remove the debris.^[6]

Advertisement

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Thanks for submitting a tip for review!

Things You'll Need

• Mild soap
• Lukewarm water
• Paper towel
• Microfiber cloth

Virtually This Commodity

Thank you to all authors for creating a page that has been read 53,729 times.

Is this article up to appointment?

Source: https://www.wikihow.com/Clean-a-Lifeproof-Case

Posted by: fabriziotwoured.blogspot.com

Share this post